CyberData 011233 Operation Manual page 58

On the Audiofiles page, enter values for the parameters indicated in
Note
Note
Web Page Item Description
Stored Messages
Stored Message 1 Stored Message 1 corresponds to the message played after pressing 1 on a phone keypad.
through 9
Stored Message 2 corresponds to the message played after pressing 2 on a phone keypad.
Stored Message 3 corresponds to the message played after pressing 3 on a phone keypad.
Stored Message 4 corresponds to the message played after pressing 4 on a phone keypad.
Stored Message 5 corresponds to the message played after pressing 5 on a phone keypad.
Stored Message 6 corresponds to the message played after pressing 6 on a phone keypad.
Stored Message 7 corresponds to the message played after pressing 7 on a phone keypad.
Stored Message 8 corresponds to the message played after pressing 8 on a phone keypad.
Stored Message 9 corresponds to the message played after pressing 9 on a phone keypad.
Repeat Type the number of times that you want the specific Stored Message to repeat. A value of 0 means
the message will play once (no repeat). A value of 1 means the message will play twice (one repeat).
Infinite When selected, the specific Stored Message will repeat indefinitely after pressing the specific
number key on a phone keypad.
Note: The repeatedly playing audio can be canceled by calling, selecting the paging zone, and
pressing the # key.
Audio Files
0-9 The name of the audio configuration option is the same as the spoken audio that plays on the board
(24 character limit).
'0' corresponds to the spoken word "zero."
'1' corresponds to the spoken word "one."
'2' corresponds to the spoken word "two."
'3' corresponds to the spoken word "three."
'4' corresponds to the spoken word "four."
'5' corresponds to the spoken word "five."
'6' corresponds to the spoken word "six."
'7' corresponds to the spoken word "seven."
'8' corresponds to the spoken word "eight."
'9' corresponds to the spoken word "nine."
Dot Corresponds to the spoken word "dot." (24 character limit).
Audio Test Corresponds to the message "This is the CyberData IP speaker test message..." (24 character limit).
Enter Code Corresponds to the message "Enter Code" (24 character limit).
CyberData Corporation
Each entry on the Audiofiles page replaces one of the stock audio files on the board. When
the input box displays the word default, the SIP Paging Adapter is using the stock audio file.
If that file is replaced with a user file, it will display the uploaded filename.
The question mark icon (
after the Toggle Help button is pressed
Table 2-14. Audiofiles Configuration Parameters
931087G
) in the following table shows which web page items will be defined
.
Setting Up the SIP Paging Adapter
Configure the Audio Parameters
Table 2-14.
Operations Guide
50