Page 1
Note You can also navigate to the Documentation page by going to www.CyberData.net and following the steps that are indicated by the following figures: SIP Paging Adapter Part Number: 011233 2.0 Select Power Source PoE Switch PoE Injector Set PoE power type to Class 0 = 15.4W CAT6 cable recommended—...
Page 2
3.0 Power Test 3.1. Plug in the CyberData device and monitor the LED activity on the front of the device. See the following figure: Link (GREEN/AMBER LED) Activity (GREEN LED) Status (GREEN/BLUE LED) Paging (GREEN LED) 3.2. The GREEN/BLUE Status LED and the...
Page 3
4.1. In a test environment, use a computer that is connected to the same switch as a single CyberData device. Note the subnet of the test computer. 4.2. Use the CyberData Discovery Utility program to locate the device on the network. You can download the Discovery Utility program from the following website address: http://www.cyberdata.net/assets/common/discovery.zip...
Page 4
Note You can also access the Technical Support help desk by navigating through menus on the CyberData website (www.CyberData.net) as shown in the following figure: The Technical Support help desk provides the options of accessing documentation for your CyberData product, browsing the knowledge base, and submitting a troubleshooting ticket.