Line-In Adjustment Potentiometer - CyberData 011233 Operation Manual

2.3.6 Line-In Adjustment Potentiometer

Located on the front of the device is a line-in adjustment potentiometer (see
Note
CyberData Corporation
Make sure that you only use a non-metallic screwdriver to adjust the line-in gain with the
potentiometer.
Caution
Equipment Hazard: Do not over torque the non-metallic screwdriver while
adjusting the line-in gain with the potentiometer.
GENERAL ALERT
Figure 2-4. Line-In Adjustment Potentiometer
931087G
Setting Up the SIP Paging Adapter
Line-In Adjustment Potentiometer
Figure 2-4).
Line-in adjustment
potentiometer on the
front of the device
Operations Guide
10