CyberData 011233 Operation Manual page 34

Web Page Item
Manual DTMF Entry for Analog Zone
Require Security Code
Security Code
Note
CyberData Corporation
Table 2-5. Device Configuration Parameters (continued)
Description
When selected, the device will prompt the caller to enter a DTMF
sequence to activate an analog zone before prompting the caller to
press 1 through 9 to send a stored message or press 0 to page.
Note: The user must press the # key after entering the zone.
When selected, the user will be prompted to enter a
(entered on the
calling the device.
Type the security code in this field.
Click on the Test Audio button to do an audio test. When the Test
Audio button is pressed, you will hear a voice message for testing the
device audio quality and volume.
Click on the Test Relay button to do a relay test.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
Click on the Toggle Help button to see a short description of some of
the web page items. First click on the Toggle Help button, and you will
see a question mark (
Move the mouse pointer to hover over a question mark to see a short
description of a specific web page item.
You must click on the Save button and then the Reboot button for the changes to take
effect.
931087G
Setting Up the SIP Paging Adapter
Configure the Device Parameters
Device Page) before being able to execute a page when
) appear next to some of the web page items.
26
Security Code
Operations Guide