Using The Event Log - Hitachi AMS 2000 User Manual

Using the event log

Using the event log helps in locating the reasons for a problem. The event
log can be displayed using Navigator 2 GUI or CLI.
To display the Event Log using the GUI
1. Select the Alerts & Events icon. The Alerts & Events screen appears.
2. Click the Event Log tab. The Event Log displays as shown in Figure 10-2.
Figure 10-2: Event Log in Navigator 2 GUI
Event Log messages show the time when an error occurred, the message,
and an error detail code, as shown in Figure 10-3. If the data pool is full,
the error message is "I6D000 Data pool does not have free space (Data
pool-xx)", where xx is the data pool number.
Figure 10-3: Detail Code Example for Data Pool Error
10–7
Troubleshooting
Hitachi AMS 2000 Family TrueCopy Extended Distance User Guide