Displaying Ospfv3 Virtual Neighbor Information - Brocade Communications Systems FastIron SX 800 Configuration Manual

Displaying OSPFv3 information
TABLE 83 show ipv6 ospf virtual-link output descriptions
This field
Index
Transit Area ID
Router ID
Interface Address
State

Displaying OSPFv3 virtual neighbor information

To display OSPFv3 virtual neighbor information for the device, enter the following command at the enabled level of the CLI.
device# show ipv6 ospf virtual-neighbor
Index Router ID
1 10.14.14.14
Option: 00-00-00
2 10.14.14.14
Option: 00-00-00
Syntax: show ipv6 ospf virtual-neighbor [brief]
The brief option results in an output that omits the Option, QCount, and Timer fields.
TABLE 84 show ipv6 ospf virtual-neighbor output descriptions
This field
Index
Router ID
Address
State
Interface
Option
QCount
Timer
340
Address
2001:db8:44:44::4
QCount: 0
2001:db8:44:44::4
QCount: 0
Displays
An index number associated with the virtual link.
The ID of the shared area of two ABRs that serves as a connection point
between the two routers.
Router ID of the router at the other end of the virtual link (virtual neighbor).
The local address used to communicate with the virtual neighbor.
The state of the virtual link. Possible states include the following:
• P2P - The link is functioning as a point-to-point interface.
• DOWN - The link is down.
State Interface
Full eth 1/1/8
Timer: 408
Full tunnel 256
Timer: 43
Displays
An index number associated with the virtual neighbor.
IPv4 address of the virtual neighbor.
The IPv6 address to be used for communication with the virtual neighbor.
The state between the device and the virtual neighbor. The state can be
one of the following:
• Down
• Attempt
• Init
• 2-Way
• ExStart
• Exchange
• Loading
• Full
The interface type.
The bits set in the virtual-link hello or database descriptors.
The number of packets that are in the queue and ready for transmission. If
the system is stable, this number should always be 0.
A timer that counts down until a hello packet should arrive. If "timers"
elapses and a hello packet has not arrived, the VL neighbor is declared to
be down.
FastIron Ethernet Switch Layer 3 Routing
53-1003627-04