Brocade Communications Systems FastIron SX 800 Configuration Manual page 586

Layer 3 behavior with MCT
This example shows the configuration of an MCT cluster, MCT member VLAN with router interface (VE), PIM configuration over MCT
member VE on MCT Peer 1.
cluster cs 10
rbridge-id 1000
session-vlan 4
keep-alive-vlan 5
icl MCT ethernet 1/1/1
peer 5.5.5.100 rbridge-id 4000 icl MCT
deploy
client client-100
rbridge-id 100
client-interface ethernet 1/1/11
deploy
!
!
!
!
!
!
end
vlan 10 name member-vlan by port
tagged ethe 1/1/1 ethe 1/1/11 ethe 1/1/25
router-interface ve 10
spanning-tree 802-1w
spanning-tree 802-1w ethe 1/1/11 disable
!
!
interface ve 10
ip address 10.10.10.100 255.255.255.0
ip pim-sparse
ip ospf area 0
586
FastIron Ethernet Switch Layer 3 Routing
53-1003627-04