Displaying Additional Ssh Connection Information - Brocade Communications Systems ICX 6650 Security Configuration Manual

Displaying SSH information
TABLE 14
Field
Encryption
Permit empty password
Authentication methods
Authentication retries
Login timeout (seconds)
Idle timeout (minutes)
Strict management VRF
SCP
SSH IPv4 clients
SSH IPv6 clients
SSH IPv4 access-list
SSH IPv6 access-list

Displaying additional SSH connection information

The show who command also displays information about SSH connections:
Brocade# show who
Console connections:
Established
you are connecting to this session
2 minutes 56 seconds in idle
SSH server status: Enabled
SSH connections (inbound):
1. established, client ip address 10.2.2.1, server hostkey DSA
1 minutes 15 seconds in idle
2. established, client ip address 10.2.2.2, server hostkey RSA
2 minutes 25 seconds in idle
SSH connection (outbound):
3. established, server ip address 10.37.77.15, server hostkey RSA
7 seconds in idle
show who [begin expression | exclude expression | include expression]
74
SSH configuration information (Continued)
Description
The encryption used for the SSH connection. The following values are
displayed when AES only is enabled:
•
•
Empty password login is allowed or not allowed.
The authentication methods used for SSH. The authentication can have
one or more of the following values:
•
•
•
The number of authentication retries. This number can be from 1 to 5.
SSH login timeout value in seconds. This can be from 0 to 120.
SSH idle timeout value in minutes. This can be from 0 to 240.
Strict management VRF is enabled or disabled.
SCP is enabled or disabled.
The list of IPv4 addresses to which SSH access is allowed. The default is
"All".
The list of IPv4 addresses to which SSh access is allowed. Default "All".
The IPv4 ACL used to permit or deny access using SSH.
The IPv6 ACL used to permit or deny access to device using SSH.
AES-256, AES-192, and AES-128 indicate the different AES
methods used for encryption.
3-DES indicates 3-DES algorithm is used for encryption.
Password - indicates that you are prompted for a password when
attempting to log into the device.
Public-key - indicates that DSA or RSA challenge-response
authentication is enabled.
Interactive - indicates the interactive authentication si enabled.
Brocade ICX 6650 Security Configuration Guide
53-1002601-01