Brocade Communications Systems FastIron SX 800 Configuration Manual page 467

TABLE 102 show ip bgp neighbors output descriptions (continued)
Field
Maximum segment size
TTL check
Byte Sent
Byte Received
Local host
Local port
Remote host
Remote port
ISentSeq
SendNext
TotUnAck
TotSent
ReTrans
UnAckSeq
IRcvSeq
RcvNext
SendWnd
TotalRcv
DupliRcv
RcvWnd
SendQue
RcvQue
CngstWnd
FastIron Ethernet Switch Layer 3 Routing
53-1003627-04
Description
• FIN-WAIT-1 - Waiting for a connection termination request
from the remote TCP, or an acknowledgment of the connection
termination request previously sent.
• FIN-WAIT-2 - Waiting for a connection termination request
from the remote TCP.
• CLOSE-WAIT - Waiting for a connection termination request
from the local user.
• CLOSING - Waiting for a connection termination request
acknowledgment from the remote TCP.
• LAST-ACK - Waiting for an acknowledgment of the connection
termination request previously sent to the remote TCP (which
includes an acknowledgment of its connection termination
request).
• TIME-WAIT - Waiting for the specific time to ensure that the
remote TCP received the acknowledgment of its connection
termination request.
• CLOSED - There is no connection state.
Shows the TCP maximum segment size.
Shows the TCP TTL check.
Shows the number of bytes sent.
Shows the number of bytes received.
Shows the IPv4 address of the device.
Shows the TCP port that the device is using for the BGP4 TCP session
with the neighbor.
Shows the IPv4 address of the neighbor.
Shows the TCP port the neighbor is using for the BGP4 TCP session with
the device.
Shows the initial send sequence number for the session.
Shows the next sequence number to be sent.
Shows the count of sequence numbers sent by the device that have not
been acknowledged by the neighbor.
Shows the count of the sequence numbers sent to the neighbor.
Shows the count of the sequence numbers that the device retransmitted
because they were not acknowledged.
Shows the current acknowledged sequence number.
Shows the initial receive sequence number for the session.
Shows the next sequence number expected from the neighbor.
Shows the size of the send window.
Shows the count of the sequence numbers received from the neighbor.
Shows the count of the duplicate sequence numbers received from the
neighbor.
Shows the size of the receive window.
Shows the count of the sequence numbers in the send queue.
Shows the count of the sequence numbers in the receive queue.
Shows the number of times the window has changed.
Displaying BGP4 information
467