Brocade Communications Systems FastIron SX 800 Configuration Manual page 198

DHCPv6 Relay Agent Prefix Delegation Notification
TABLE 46 Output from the show ipv6 dhcp-relay prefix-delegation-information command (continued)
Field
Current
Maximum
AdminDistance
Displaying the DHCPv6 Relay information for an interface
Enter the show ipv6 dhcp-relay interface command to display DHCPv6 relay information for a specific interface.
device#show ipv6 dhcp-relay interface ve 100
DHCPv6 Relay Information for interface ve 100:
Destinations:
Destination
2001:db8:1::39
Options:
Interface-Id: No
Prefix Delegation Notification:
Current:0 Maximum:20000 AdminDistance:10
Syntax: show ipv6 dhcp-relay interface interface type
The interface type is interface type such as ethernet, POS (Point of Service), or VE and the specific port number.
Table 47 describes the fields from the output of the show ipv6 dhcp-relay interface command.
TABLE 47 Output from the show ipv6 dhcp-relay interface command
Field
Destinations
Options
Prefix Delegation Notification
Clearing the DHCPv6 delegated prefixes
To clear the DHCPv6 delegated prefixes for specific VRFs, use the clear ipv6 dhcp-relay delegated-prefixes command at the privilege
level.
device# clear ipv6 dhcp-relay delegated-prefixes vrf VRF1
198
Description
The number of delegated prefixes currently learned on the interface.
The maximum number of delegated prefixes that can be learned on the interface.
The current administrative distance used for prefixes learned on this interface when added to the
IPv6 static route table.
OutgoingInterface
NA
Remote-Id:No
Description
The DHCPv6 relay destination configured on the interface.
• Destination : The configured destination IPv6 address.
• OutgoingInterface : The interface on which packet will be
relayed if the destination relay address is link local or multicast.
The current information about DHCPv6 relay options for the interface.
• Interface-Id : The interface ID option indicating if the option is
used or not.
• Remote-Id : The remote ID option indicating if the option is
used or not.
This current information about the DHCPv6 Prefix Delegation for the
interface.
• Interface: The name of the interface.
• Current - The number of delegated prefixes currently learned on
the interface.
• Maximum - The maximum number of delegated prefixes that
can be learned on the interface.
• AdminDistance - The administrative distance used for prefixes
learned on the specific interface when added to IPv6 Static
Route table.
FastIron Ethernet Switch Layer 3 Routing
53-1003627-04