Brocade Communications Systems FastIron SX 800 Configuration Manual page 578

Layer 3 behavior with MCT
S1-SW configuration
This example presents the configuration for the S1-SW device.
!
lag lag_s1_sw static id 60
ports ethe 1/1/1 to 1/1/2
primary-port 1/1/1
deploy
!
vlan 110 by port
tagged ethe 1/1/1 to 1/1/2
router-interface ve 110
!
interface ve 110
ip address 10.110.0.1 255.255.255.0
!
MCT configuration with VRRP-E
The following figure shows a sample MCT configuration with VRRP-E. The associated configuration follows. The configuration for VRRP
is similar.
FIGURE 42 Sample MCT configuration with VRRP-E
Router A - VRRP-E configuration
This example presents the VRRP-E configuration for the Router A cluster device.
!
router vrrp-extended
!
interface ve 110
port-name S1-SW
ip address 10.110.0.253 255.255.255.0
ip vrrp-extended vrid 110
backup
ip-address 10.110.0.254
short-path-forwarding
enable
!
578
FastIron Ethernet Switch Layer 3 Routing
53-1003627-04