Polycom SpectraLink 1725-36028-001 Administration Manual page 90

SpectraLink 8000 Telephony Gateway Administration Guide
90
3. At the FTP prompt, type binary. A confirm message will display.
4. Use Get to backup the files and
Backup: At the FTP prompt, use the
required files from the SpectraLink 8000 Telephony Gateway to
the server: get config.bin
Restore: At the FTP prompt, use the
required files from the server to the SpectraLink 8000 Telephony
Gateway: put config.bin
get put
The and commands will copy files. If you have multiple
SpectraLink 8000 Telephony Gateways, be careful not to overwrite
the config.bin files. To avoid this, you can:
•
Change directories before you connect and copy each
Gateway's config.bin file to its own directory.
•
Use the local file name form of the get (or put) command to
rename the file when it is copied. For example,
get config.bin gateway1.bin
copies config.bin as gateway1.bin to the host.
•
Remember to copy the correct files when restoring configuration
files. For example
put gateway1.bin config.bin
copies gateway1.bin as config.bin to the Telephony Gateway
that you have designated as gateway1.
5. After files are transferred, use the Quit command to quit FTP.
6. Reset the system via the
restore Maintenance Lock
7. Navigate to the Gateway Configuration
Configuration screens to ensure all configuration information has
been restored.
Put to restore files.
command to transfer the
get
.
put command to transfer the
.
Gateway Configuration
to No .
and Telephone Line
PN: 1725-36028-001_T.doc
screen in order to