Table of Contents
Advertisement
SpectraLink 8000 Telephony Gateway Administration Guide
Error Status
94
Last Heard
and
System Uptime
recently which might indicate that there has been a break in
communications.
System Uptime
: Is the time elapsed since the SpectraLink 8000
Telephony Gateway was last reset or power cycled. This indicator
allows you to check AP activity against SpectraLink 8000 Telephony
Gateway functionality.
If the SpectraLink 8000 Telephony Gateway should be hearing from
an AP due to an active handset that should be using it, but isn't, there
will be a significant variation in the APs
System Uptime
.
Clear
: Clearing the statistics sets
zero. It does not remove any APs from the displayed array. The
function allows you start over and view AP activity from that point in
time.
Unless noted otherwise, times are displayed using the format:
D - HH : MM : SS
D is day, HH is hours, MM is minutes, and SS is seconds.
The
Error Status
screen displays any alarms that indicate some system
malfunction. Some of these alarms are easily remedied and others
require a call to Polycom's Customer Support Department.
From the
System Status Menu
active alarms on the SpectraLink 8000 Telephony Gateway. The
following sample screen displays two Line Sync alarms.
indicates that the AP has not been used
Last Heard
Num WTS
,
Max WTS
, select
Error Status
. The screen displays
PN: 1725-36028-001_T.doc
time and the
, and
Not Best
to
Clear
Advertisement
Table of Contents
