Table of Contents
Advertisement
Telephone Line Configuration
Adding or Changing a Handset
PN: 1725-36028-001_T.doc
Telephone line configuration is performed after the initial SpectraLink
8000 Telephony Gateway installation is complete and the Gateway is
configured. The configuration procedure associates a handset with its
telephone port in the SpectraLink 8000 Telephony Gateway.
For the line configuration of handsets, please have the handsets to be
configured and the Wireless Device Planning Worksheet(s). There should
be one worksheet per SpectraLink 8000 Telephony Gateway that lists
the port assignment, extension, and user name for each handset. The
steps to add a handset will need to be done for each handset on each
SpectraLink 8000 Telephony Gateway.
Note that an 8-port Gateway will only show eight line interfaces on
the configuration screen.
When adding or changing a handset, a MAC address must be entered.
Handset registration may be accomplished over the air by simply
selecting the appropriate line MAC address field with the arrow keys,
typing
R
for
On Air Register
address is automatically captured. Optionally, the party's name and
extension number may be recorded. Use the arrow keys to navigate to
the name and extension fields and manually enter the associated data.
The system will not allow you to register the same handset to two
different lines. Use Esc to cancel out of any unwanted transaction.
and powering on the handset. The MAC
13
67
Advertisement
Table of Contents
