Table of Contents
Advertisement
SpectraLink 8000 Telephony Gateway Administration Guide
Programming Digital PBX Features
Programming Analog PBX Features
74
Navigate to the
NetLink Wireless Telephone System
SpectraLink 8000 Telephony Gateway and select
Programming
. A screen similar to the following displays:
The numbers and symbols along the left side of the screen indicate
which number or digit key is being pressed after the
activate the feature.
1. Navigate to
key 1
2. If a SpectraLink 8000 OAI Gateway is part of the system, navigate
to the key the OAI function is to be assigned to and type OAI.
3. See below for programming the ADMIN feature.
All other digital features are programmed in the PBX per the LinkPlus
Interface Guide for your system.
For analog systems, follow the above steps for digital programming,
then proceed with the steps below:
1. The table below displays the default menu options that are
programmed into the handsets for an analog system. You may set
these same functions here or change them to something else. If
and type MUTE.
menu for the
Feature
FCN
key to
PN: 1725-36028-001_T.doc
Advertisement
Table of Contents
