Table of Contents
Advertisement
SpectraLink 8000 Telephony Gateway Administration Guide
48
Configuration
screen. Use the arrow keys to highlight
Systems
and press Enter. Respond with a
Note that after IP addresses are established and the SpectraLink
8000 Telephony Gateways are functioning on the LAN, the
S
=Send All command can be used to send configuration
information to every SpectraLink 8000 Telephony Gateway in
your LAN.
5. Unplug the serial cable.
Reset All
Y
to the reset prompt.
PN: 1725-36028-001_T.doc
Advertisement
Table of Contents
Need help?
Do you have a question about the SpectraLink 1725-36028-001 and is the answer not in the manual?