Table of Contents
Advertisement
Message
Description
Server Busy
Handset is attempting to download from a Download Master that is busy downloading other
phones and refusing additional downloads. The handset will automatically retry the download
every few seconds.
TFTP
A failure has occurred during the TFTP download of one of the files. (x) = The file number
ERROR(x):yy
which was being downloaded; yy is an error code describing the particular failure. Possible
error codes are:
01 = TFTP server did not find the requested file.
02 = Access violation (reported from TFTP server).
07 = TFTP server reported "No such user" error. Check the TFTP server configuration.
81 = File put into memory did not CRC. The handset will attempt to download the file again.
FF = Timeout error. TFTP server did not respond within a specified period of time.
Erase Failed
Download process failed to erase the memory in the handset. This operation will retry.
Waiting
Handset has attempted some operation several times and failed, and is now waiting for a
period of time before attempting that operation again.
(Internal
OE = Error while writing the Flash (return handset to factory)
Errors)
OF = No functional code (return handset to factory)
Backup and Restore SpectraLink 8000
Telephony Gateway Configuration
PN: 1725-36028-001_T.doc
Download failure or recovery messages
The following display messages indicate a failure or recovery
situation during the download process.
Proper software maintenance activities include backing up the system
to safeguard the configuration of the SpectraLink 8000 Telephony
Gateway. FTP is used to copy the Gateway configuration (filename
config.bin
) from the SpectraLink 8000 Telephony Gateway for backup
purposes. The files can then be restored to the system as needed, also
using FTP.
The following is an example of software transfer using FTP.
FTP commands may vary depending on your FTP program.
To copy the configuration from/to the SpectraLink 8000 Telephony
Gateway:
1. Connect to the SpectraLink 8000 Telephony Gateway.
2. Log in using the administrator login and password. A login
confirm message will display, followed by the
Software Maintenance
FTP>
prompt.
89
Advertisement
Table of Contents
