Table of Contents
Advertisement
Unpacking the RMX
Unpacking the RMX 1500
To unpack and lift the RMX 1500:
1
When you receive the RMX 1500 packing case, inspect the equipment
for damage and verify that the components match the packing slip.
2
Open the top cover of the RMX 1500 packing case and make sure that
the Installation Accessories kit contains the power cables and a USB
Key.
3
Remove the top cover, lift the RMX 1500 from the package and place
it on a flat surface.
Write down the RMX's serial number that is on a sticker on the back of the unit.
It will be needed for product registration later in the process.
Unpacking the RMX 2000
To unpack and lift the RMX 2000:
1
When you receive the RMX 2000 packing case, inspect the equipment
for damage and verify that the components match the packing slip.
2
Open the top cover of the RMX 2000 packing case and make sure that
the Installation Accessories kit contains the power cables and a USB
Key.
3
Remove the top cover, lift the RMX 2000 from the package and place
it on a flat surface.
Write down the RMX's serial number that is on a sticker on the back of the unit.
It will be needed for product registration later in the process.
Unpacking the RMX 4000
To unpack and lift the RMX 4000:
1
When you receive the RMX 4000 packing case, inspect the equipment
for damage and verify that the components match the packing slip.
2
The RMX 4000 is shipped in a packing case with Stratocell®
packaging, and the top cover must be unlocked and lifted.
3
Open the top cover of the packing case.
Polycom RMX 1500/2000/4000 Getting Started Guide
2-5
Advertisement
Table of Contents
