Table of Contents
Advertisement
Chapter 2-First Time Installation and Configuration
2-36
The Phones dialog box opens.
23 Click Add to define dial-in number ranges.
The Add Phone Number dialog box opens.
24 Define the following parameters:
Table 2-12
Fast Configuration Wizard – Add Phone Numbers
Field
First Number
Last Number
•
A range must include at least two dial-in numbers.
•
A range cannot exceed 1000 numbers.
25 Click OK.
The new range is added to the Dial-in Phone Numbers table.
26 Optional. Repeat steps 23 to 24 to define additional dial-in ranges.
27 In the Phones tab enter the MCU CLI (Calling Line Identification).
Description
The first number in the phone number range.
The last number in the phone number range.
Advertisement
Table of Contents
