Aaa For Telnet Users By Separate Servers - HP 5500 HI Series Configuration Manual

# Configure the switch to use AAA for Telnet users.
[Switch] user-interface vty 0 4
[Switch-ui-vty0-4] authentication-mode scheme
[Switch-ui-vty0-4] quit
# Create HWTACACS scheme hwtac.
[Switch] hwtacacs scheme hwtac
# Specify the primary authentication server.
[Switch-hwtacacs-hwtac] primary authentication 10.1.1.1 49
# Specify the primary authorization server.
[Switch-hwtacacs-hwtac] primary authorization 10.1.1.1 49
# Specify the primary accounting server.
[Switch-hwtacacs-hwtac] primary accounting 10.1.1.1 49
# Set the shared keys for secure authentication, authorization, and accounting communication to
expert.
[Switch-hwtacacs-hwtac] key authentication simple expert
[Switch-hwtacacs-hwtac] key authorization simple expert
[Switch-hwtacacs-hwtac] key accounting simple expert
# Configure the scheme to remove the domain name from a username before sending the
username to the HWTACACS server.
[Switch-hwtacacs-hwtac] user-name-format without-domain
[Switch-hwtacacs-hwtac] quit
# Configure the AAA methods for the domain.
[Switch] domain bbb
[Switch-isp-bbb] authentication login hwtacacs-scheme hwtac
[Switch-isp-bbb] authorization login hwtacacs-scheme hwtac
[Switch-isp-bbb] accounting login hwtacacs-scheme hwtac
[Switch-isp-bbb] quit
2. Verify the configuration:
Telnet to the switch as a user and enter the correct username and password. You pass
authentication and log in to the switch. Issuing the display connection command on the switch, you
can see information about the user connection.

AAA for Telnet users by separate servers

Network requirements
As shown in
and RADIUS accounting services for Telnet users. Set the shared keys for secure communication with the
HWTACACS server and the RADIUS server to expert. Configure the switch to remove the domain name
from a username before sending the username to the servers.
Figure 12, configure the switch to provide local authentication, HWTACACS authorization,
51