HP 5500 HI Series Configuration Manual page 223

Security
Hide thumbs Also See for 5500 HI Series:
Table of Contents

Advertisement

# Display the configuration of the ISP domain sun.
<Device> display domain sun
Domain : sun
State : Active
Access-limit : 30
Accounting method : Required
Default authentication scheme
Default authorization scheme
Default accounting scheme
Domain User Template:
Idle-cut : Disabled
Self-service : Disabled
Authorization attributes:
# Display the port security configuration.
<Device> display port-security interface gigabitethernet 1/0/1
Equipment port-security is enabled
Trap is disabled
Disableport Timeout: 20s
OUI value:
Index is 1,
OUI value is 123401
Index is 2,
OUI value is 123402
Index is 3,
OUI value is 123403
Index is 4,
OUI value is 123404
Index is 5,
OUI value is 123405
GigabitEthernet1/0/1 is link-up
Port mode is userLoginWithOUI
NeedToKnow mode is disabled
Intrusion Protection mode is NoAction
Max MAC address number is not configured
Stored MAC address number is 0
Authorization is permitted
Security MAC address learning mode is sticky
Security MAC address aging type is absolute
After an 802.1X user gets online, you can see that the number of secure MAC addresses stored is 1.
# Display 802.1X information.
<Device> display dot1x interface gigabitethernet 1/0/1
Equipment 802.1X protocol is enabled
CHAP authentication is enabled
EAD quick deploy is disabled
Configuration: Transmit Period
Quiet Period
Supp Timeout
Reauth Period
The maximal retransmitting times
EAD quick deploy configuration:
: radius:radsun
: radius:radsun
: radius:radsun
30 s,
Handshake Period
60 s,
Quiet Period Timer is disabled
30 s,
Server Timeout
3600 s
210
15 s
100 s
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents