HP 5500 HI Series Configuration Manual page 191

# Set the server type for the RADIUS scheme. When using the IMC server, set the server type to
extended.
[SwitchA-radius-rs1] server-type extended
# Specify the primary authentication server and primary accounting server, and configure the keys
for communication with the servers.
[SwitchA-radius-rs1] primary authentication 192.168.0.111
[SwitchA-radius-rs1] primary accounting 192.168.0.111
[SwitchA-radius-rs1] key accounting simple radius
[SwitchA-radius-rs1] key authentication simple radius
# Configure the device to not carry the ISP domain name in the username sent to the RADIUS
server.
[SwitchA-radius-rs1] user-name-format without-domain
# Specify the source IP address for RADIUS packets to be sent as 3.3.0.3.
[SwitchA-radius-rs1] nas-ip 3.3.0.3
[SwitchA-radius-rs1] quit
Use the nas-ip command to specify the source IP address for RADIUS packets to be sent, and make
sure that the source IP address is consistent with the IP address of the access device specified on
the server to avoid authentication failures.
2. Configure an authentication domain:
# Create an ISP domain named dm1 and enter its view.
[SwitchA] domain dm1
# Configure AAA methods for the ISP domain.
[SwitchA-isp-dm1] authentication portal radius-scheme rs1
[SwitchA-isp-dm1] authorization portal radius-scheme rs1
[SwitchA-isp-dm1] accounting portal radius-scheme rs1
[SwitchA-isp-dm1] quit
# Configure domain dm1 as the default ISP domain for all users. Then, if a user enters a username
without any ISP domain at logon, the authentication and accounting methods of the default
domain will be used for the user.
[SwitchA] domain default enable dm1
3. Configure portal authentication:
# Configure the portal server as follows:
Name: newpt
IP address: 192.168.0.1 1 1
VPN: vpn3
Key: portal in plain text
Port number: 50100
URL: http://192.168.0.1 1 1:8080/portal
[SwitchA] portal server newpt ip 192.168.0.111 vpn-instance vpn3 key simple portal
port 50100 url http://192.168.0.111:8080/portal
# Enable Layer 3 portal authentication on the interface connecting the user side.
[SwitchA] interface vlan-interface 3
[SwitchA–Vlan-interface3] portal server newpt method layer3
[SwitchA–Vlan-interface3] quit
178