Setting User Group Password Control Parameters - HP 5500 HI Series Configuration Manual

Step
4. Set the minimum password
length.
5. Configure the password
composition policy.
6. Configure the password
complexity checking policy.
7. Set the maximum number of
history password records for
each user.
8. Specify the maximum number
of login attempts and the
action to be taken when a
user fails to log in after the
specified number of attempts.
9. Set the number of days during
which the user is warned of
the pending password
expiration.
10. Set the maximum number of
days and maximum number
of times that a user can log in
after the password expires.
11. Set the authentication timeout
time.
12. Set the maximum account idle
time.
NOTE:
The password-control login-attempt command takes effect immediately and can affect the users already
in the password control blacklist. Other password control configurations do not take effect for users that
have been logged in or passwords that have been configured.

Setting user group password control parameters

Command
password-control length length
password-control composition
type-number type-number
[ type-length type-length ]
password-control complexity
{ same-character | user-name }
check
password-control history
max-record-num
password-control login-attempt
login-times [ exceed { lock | unlock
| lock-time time } ]
password-control
alert-before-expire alert-time
password-control
expired-user-login delay delay
times times
password-control
authentication-timeout
authentication-timeout
password-control login idle-time
idle-time
225
Remarks
Optional.
10 characters by default.
Optional.
•
In non-FIPS mode, by default, a
password must contain at least
one type of characters and
each type must contain at least
one character.
•
In FIPS mode, by default, a
password must contain four
types of characters and each
type must contain at least one
character.
Optional.
By default, the system does not
perform password complexity
checking.
Optional.
4 by default.
Optional.
By default, the maximum number
of login attempts is 3 and a user
failing to log in after the specified
number of attempts must wait for
one minute before trying again.
Optional.
7 days by default.
Optional.
By default, a user can log in three
times within 30 days after the
password expires.
Optional.
60 seconds by default.
Optional.
90 days by default.