HP 5500 HI Series Configuration Manual page 50

HWTACACS does not support accounting for FTP users.
•
To specify HWTACACS accounting servers and set relevant parameters for an HWTACACS scheme:
Step
1. Enter system view.
2. Enter HWTACACS scheme
view.
3. Specify HWTACACS
accounting servers.
4. Enable buffering of
stop-accounting requests to
which no responses are
received.
5. Set the maximum number of
stop-accounting attempts.
Specifying the shared keys for secure HWTACACS communication
The HWTACACS client and HWTACACS server use the MD5 algorithm to authenticate packets
exchanged between them and use shared keys for packet authentication and user passwords encryption.
They must use the same key for the same type of communication.
To specify a shared key for secure HWTACACS communication:
Step
1. Enter system view.
2. Enter HWTACACS scheme
view.
3. Specify a shared key for
secure HWTACACS
authentication, authorization,
or accounting
communication.
NOTE:
A shared key configured on the switch must be the same as that configured on the HWTACACS server.
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
•
Specify the primary HWTACACS
accounting server:
primary accounting ip-address
[ port-number | key [ cipher |
simple ] key | vpn-instance
vpn-instance-name ] *
•
Specify the secondary
HWTACACS accounting server:
secondary accounting ip-address
[ port-number | key [ cipher |
simple ] key | vpn-instance
vpn-instance-name ] *
stop-accounting-buffer enable
retry stop-accounting retry-times
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
key { accounting | authentication |
authorization } [ cipher | simple ] key
37
Remarks
N/A
N/A
Configure at least one
command.
No accounting server is
specified by default.
The key [ cipher | simple ] key
option is available in Release
5206 and later versions.
Optional.
Enabled by default.
Optional.
The default setting is 100.
Remarks
N/A
N/A
No shared key is specified by
default.