Configuring The Switch As The Scp Client - HP 5500 HI Series Configuration Manual

Configuring the switch as the SCP client

To upload or download files to or from an SCP server:
Step
1. Upload a file
to an SCP
server.
Command
•
Upload a file to the IPv4 SCP server:
In non-FIPS mode:
scp server [ port-number ] put source-file-path
[ destination-file-path ] [ identity-key { dsa | rsa } |
prefer-ctos-cipher { 3des | aes128 | des } | prefer-ctos-hmac
{ md5 | md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 | dh-group14 } |
prefer-stoc-cipher { 3des | aes128 | des } | prefer-stoc-hmac
{ md5 | md5-96 | sha1 | sha1-96 } ] *
In FIPS mode:
scp server [ port-number ] put source-file-path
[ destination-file-path ] [ identity-key rsa | prefer-ctos-cipher
{ aes128 | aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } |
prefer-kex dh-group14 | prefer-stoc-cipher { aes128 | aes256 } |
prefer-stoc-hmac { sha1 | sha1-96 } ] *
•
Upload a file to the IPv6 SCP server:
In non-FIPS mode:
scp ipv6 server [ port-number ] put source-file-path
[ destination-file-path ] [ identity-key { dsa | rsa } |
prefer-ctos-cipher { 3des | aes128 | des } | prefer-ctos-hmac
{ md5 | md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 | dh-group14 } |
prefer-stoc-cipher { 3des | aes128 | des } | prefer-stoc-hmac
{ md5 | md5-96 | sha1 | sha1-96 } ] *
In FIPS mode:
scp ipv6 server [ port-number ] put source-file-path
[ destination-file-path ] [ identity-key rsa | prefer-ctos-cipher
{ aes128 | aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } |
prefer-kex dh-group14 | prefer-stoc-cipher { aes128 | aes256 } |
prefer-stoc-hmac { sha1 | sha1-96 } ] *
440
Remarks
Use one of the
commands.
Available in
user view.