Configuring Radius Schemes - HP 5500 HI Series Configuration Manual

Task
Display the user group configuration
information.

Configuring RADIUS schemes

A RADIUS scheme specifies the RADIUS servers that the switch can cooperate with and defines a set of
parameters that the switch uses to exchange information with the RADIUS servers. There may be
authentication/authorization servers and accounting servers, or primary servers and secondary servers.
The parameters include the IP addresses of the servers, the shared keys, and the RADIUS server type.
RADIUS scheme configuration task list
Task
Creating a RADIUS scheme
Specifying the RADIUS authentication/authorization servers
Specifying the RADIUS accounting servers and the relevant parameters
Specifying the shared keys for secure RADIUS communication
Specifying the VPN to which the servers belong
Setting the username format and traffic statistics units
Setting the supported RADIUS server type
Setting the maximum number of RADIUS request transmission attempts
Setting the status of RADIUS servers
Specifying the source IP address for outgoing RADIUS packets
Specifying a backup source IP address for outgoing RADIUS packets
Setting timers for controlling communication with RADIUS servers
Configuring RADIUS accounting-on
Configuring the IP address of the security policy server
Configuring interpretation of RADIUS class attribute as CAR parameters
Enabling the trap function for RADIUS
Enabling the RADIUS client service
Setting the DSCP value for RADIUS packets
Displaying and maintaining RADIUS
Creating a RADIUS scheme
Before performing other RADIUS configurations, follow these steps to create a RADIUS scheme and enter
RADIUS scheme view:
Command
display user-group [ group-name ] [ |
{ begin | exclude | include }
regular-expression ]
21
Remarks
Available in any view
Remarks
Required
Required
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional