HP 5500 HI Series Configuration Manual page 274

After the SCEP add-on installation completes, a URL is displayed, which you must configure on the
switch as the URL of the server for certificate registration.
3. Modify the certificate service attributes:
a. Select Control Panel > Administrative Tools > Certificate Authority from the start menu.
If the CA server and SCEP add-on have been installed successfully, there should be two
certificates issued by the CA to the RA.
b. Right-click the CA server in the navigation tree and select Properties > Policy Module.
c. Click Properties and select Follow the settings in the certificate template, if applicable.
Otherwise, automatically issue the certificate.
4. Modify the Internet Information Services (IIS) attributes:
a. Select Control Panel > Administrative Tools > Internet Information Services (IIS) Manager from
the start menu.
b. Select Web Sites from the navigation tree.
c. Right-click Default Web Site and select Properties > Home Directory.
d. Specify the path for certificate service in the Local path text box.
To avoid conflict with existing services, specify an available port number as the TCP port
number of the default website.
After completing the configuration, make sure the system clock of the switch is synchronous to that of the
CA server, so that that the switch can request a certificate normally.
Configuring the switch
1. Configure the entity name as aaa and the common name as
<Device> system-view
[Device] pki entity aaa
[Device-pki-entity-aaa] common-name device
[Device-pki-entity-aaa] quit
2. Configure the PKI domain:
# Create PKI domain torsa and enter its view.
[Device] pki domain torsa
# Configure the name of the trusted CA as myca.
[Device-pki-domain-torsa] ca identifier myca
# Configure the URL of the registration server in the format of http://host:port/
certsrv/mscep/mscep.dll, where host:port indicates the IP address and port number of the CA
server.
[Device-pki-domain-torsa] certificate request url
http://4.4.4.1:8080/certsrv/mscep/mscep.dll
# Set the registration authority to RA.
[Device-pki-domain-torsa] certificate request from ra
# Specify the entity for certificate request as aaa.
[Device-pki-domain-torsa] certificate request entity aaa
3. Generate a local key pair using RSA:
[Device] public-key local create rsa
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
It will take a few minutes.
261
d
evice.