HP 5500 HI Series Configuration Manual page 46

Step
1. Enter system view.
2. Enable the trap
function for RADIUS.
Enabling the RADIUS client service
To receive and send RADIUS packets, enable the RADIUS client service on the device. If RADIUS is not
required, disable the RADIUS client service to avoid attacks that exploit RADIUS packets.
To enable the RADIUS client service:
Step
1. Enter system view.
2. Enable the RADIUS client
service.
Setting the DSCP value for RADIUS packets
Step
1. Enter system view.
2. Set the DSCP value for IPv4
RADIUS packets.
3. Set the DSCP value for IPv6
RADIUS packets.
Displaying and maintaining RADIUS
Task
Display the configuration information
of RADIUS schemes.
Display the statistics for RADIUS
packets.
Display information about buffered
stop-accounting requests for which no
responses have been received.
Clear RADIUS statistics.
Command
system-view
radius trap { accounting-server-down |
authentication-error-threshold |
authentication-server-down }
Command
system-view
radius client enable
Command
system-view
radius dscp dscp-value
radius ipv6 dscp dscp-value
Command
display radius scheme
[ radius-scheme-name ] [ slot
slot-number ] [ | { begin | exclude |
include } regular-expression ]
display radius statistics [ slot
slot-number ] [ | { begin | exclude |
include } regular-expression ]
display stop-accounting-buffer
{ radius-scheme radius-scheme-name |
session-id session-id | time-range
start-time stop-time | user-name
user-name } [ slot slot-number ] [ |
{ begin | exclude | include }
regular-expression ]
reset radius statistics [ slot slot-number ]
33
Remarks
N/A
Disabled by default.
Remarks
N/A
Optional.
Enabled by default.
Remarks
N/A
Optional.
The default DSCP value is 0.
Optional.
The default DSCP value is 0.
Remarks
Available in any view
Available in any view
Available in any view
Available in user view