Charge / Lamp Coil (If Equipped) Removal/Installation - Honda GX240RT2 Service And Repair Manual

CHARGE / LAMP COIL (IF EQUIPPED)
REMOVAL/INSTALLATION
Remove the following parts:
– Fan cover
– Ignition coil
– Remove the flywheel
Remove the coil connector or connectors.
Installation is in the reverse of removal.
Install the cord clamp
Adjust the maximum speed
18A CHARGE COIL
BOLT (6 x 40 mm) (4)
gx240ut2_gx270ut2_gx340ut2_gx390ut2
(page 5-2)
(page 9-3)
(page 8-7)
(page 2-12).
(page 7-8).
18A CHARGE COIL TYPE:
CORD
GROMMET
CORD
CLAMP
BOLT (6 x 12 mm)
CORD GROMMET
10A CHARGE COIL
BOLT (6 x 40 mm) (4)
1A/3A CHARGE
COIL
3A CHARGE COIL TYPE: BOLT (6 x 40 mm) (2)
1A CHARGE COIL TYPE: BOLT (6 x 35 mm) (2)
LAMP COIL TYPE
BOLT (6 x 40 mm) (2)
CHARGING SYSTEM
10A CHARGE
COIL TYPE:
CORD CLAMP
BOLT (6 x 12 mm)
1A/3A CHARGE
COIL TYPE:
CORD CLAMP
BOLT (6 x 12 mm)
CORD
GROMMET
LAMP COIL TYPE:
CORD CLAMP
BOLT (6 x 12 mm)
CORD
GROMMET