Honda GX240RT2 Service And Repair Manual page 268

RECOIL STARTER ASSEMBLY
To prevent serious eye injury, always wear safety
goggles or other eye protection when using com-
pressed springs.
Install the recoil starter cover (1) to the recoil starter
case (2).
• Align the recoil starter cover pawls (3) with the recoil
starter case tabs (4).
Install the rope cover (5) to the recoil starter cover
bosses (6).
Install the clips (7) securely.
• Replace the clips if necessary.
Pass the recoil starter rope (1) through the hole (2) of
the recoil starter pulley (3), and then tie the rope as
shown.
Before installing the recoil starter rope, check for fray or
wear.
Wind the recoil starter rope onto the recoil starter pulley
counterclockwise.
gx240ut2_gx270ut2_gx340ut2_gx390ut2
STARTING SYSTEM
(7)
(5)
(6)
10 mm
(0.4 in)
(2)
(5)
(2)
(3)
(4)
(1)
(3)
(1)