Honda GX240RT2 Service And Repair Manual page 242

CARBURETOR REMOVAL/
INSTALLATION
(*) Refer to page of base shop manual (GX240/GX270/GX340/GX390UT2, P/N 61Z5F00E3)
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when han-
dling fuel.
• Keep heat, sparks, and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
Turn the fuel valve lever to the OFF position.
Remove the harness cover
Remove the air cleaner
Remove the ECM connector and power coil connector.
Set a commercially available tube clamp to the fuel
tube.
Disconnect the fuel tube from the carburetor.
Remove the drain bolt to drain the carburetor completely.
POWER COIL CONNECTOR
INSULATOR PACKING
CARBURETOR INSULATOR
INSTALLATION:
Before installing, clean the passage
thoroughly with compressed air.
Install the carburetor insulator with the
vent groove facing toward the carburetor.
After installing, clamp the high tension
cord to the carburetor insulator.
HIGH TENSION
CARBURETOR
CORD
INSULATOR
gx240ut2_gx270ut2_gx340ut2_gx390ut2
(page 6-2).
(page 6-5)*.
ECM CONNECTOR FUEL TUBE
CARBURETOR PACKING
FUEL TUBE CLAMP
(Commercially available)
B8 / D8 TUBE CLAMP
CARBURETOR ASSY.
FUEL SYSTEM
DRAIN BOLT