CRANKCASE
GX240/GX270 CRANKSHAFT/P.T.O. SHAFT OIL SEAL
REPLACEMENT (1/2 REDUCTION WITH CLUTCH)
LOCATION
REDUCTION COVER
P.T.O. SHAFT OIL SEAL
(30 x 50 x 7 mm)
P.T.O. SHAFT OIL SEAL
(30 x 50 x 7 mm)
Remove the oil seal from the reduction cover.
Apply grease to the lip of a new oil seal (1).
Drive the oil seal in the position as shown using the
special tools.
TOOLS:
Attachment 45 x 50 mm (2)
Driver 15 x 135 mm (3)
CRANKSHAFT OIL SEAL
(30 x 46 x 8 mm)
Remove the oil seal from the reduction case.
Apply grease to the lip of a new oil seal (1).
Drive the oil seal in the position as shown using the
special tools.
TOOLS:
Attachment 45 x 50 mm (2)
Driver 15 x 135 mm (3)
gx240ut2_gx270ut2_gx340ut2_gx390ut2
CRANKSHAFT OIL SEAL
(30 x 46 x 8 mm)
07946-6920100
07749-0010000
OIL SEAL LIP
07946-6920100
07749-0010000
OIL SEAL LIP
REDUCTION CASE
(3)
(2)
(3)
(2)
(1)
(1)