Fuel Tank Removal/Installation - Honda GX120T2 Supplement Manual

62Z4H00X.book 2 ページ ２０１１年１２月９日 金曜日 午後５時４０分
FUEL SYSTEM

FUEL TANK REMOVAL/INSTALLATION

FUEL SYSTEM
(*) Refer to page of base shop manual (GX120UT2/
160UT2/200UT2, P/N 62Z4H00).
Gasoline is highly flammable and explosive. You
can be burned or seriously injured when handling
fuel.
• Keep heat, sparks, and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
Remove the fan cover (page 5-2*).
Remove the starter motor (page 10-7*).
Starter motor type:
Place a suitable container under the carburetor.
Turn the fuel valve lever [1] to the ON position.
Loosen the drain screw [2] and drain the fuel.
• Route the fuel tube properly (page 2-11*).
FUEL GAUGE
(GX160T2/GX200T2)
FUEL FILTER (If equipped)
CHECK:
Check the fuel filter for clogs or damage.
O-RING
FUEL TANK JOINT
2 N·m (0.2 kgf·m, 1.5 lbf·ft)
CHECK:
Check the screen of the fuel tank
joint for clogs or damage.
FUEL TANK BOLT (6 x 29 mm)
10 N·m (1.0 kgf·m, 7 lbf·ft)
6-2
FUEL FILLER CAP PACKING
FUEL FILLER CAP
CHECK:
Check for deterioration or cracks.
If equipped:
SCREW (5 x 10 mm) (2)
FUEL GAUGE (GX120T2)
FUEL TANK
FUEL TANK NUT (6 mm) (2)
10 N·m (1.0 kgf·m, 7 lbf·ft)
FUEL TUBE
CHECK:
Check for deterioration or cracks.
[1]
[2]