Fuel Tank Removal/Installation - Honda GX240RT2 Service And Repair Manual

FUEL TANK REMOVAL/INSTALLATION

Gasoline is highly flammable and explosive.
You can be burned or seriously injured when
handling fuel.
• Keep heat, sparks, and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
Turn the fuel valve lever to the OFF position.
Set a commercially available tube clip to the fuel tube.
FUEL FILLER CAP PACKING
INSTALLATION:
Before installing, check for
deterioration or cracks.
FUEL FILTER
INSTALLATION:
Before installing, check the
screen of the fuel filter for
clogs or damage.
FUEL TANK JOINT
2 N·m (0.2 kgf·m, 1.5 lbf·ft)
INSTALLATION:
Before installing, check the
screen of the fuel strainer
for clogs or damage.
TUBE CLIP
BOLT (8 x 25 mm)
(2)
24 N·m (2.4 kgf·m,
17 lbf·ft)
FUEL TUBE
INSTALLATION:
Before installing, check for
deterioration or cracks.
gx240ut2_gx270ut2_gx340ut2_gx390ut2
FUEL FILLER CAP
O-RING
FUEL SYSTEM
ENGINE SERVICE BULLETIN #40 =>
FUEL GAUGE
(If equipped)
INSTALLATION:
Install the fuel gauge as shown.
FUEL TANK
B8 TUBE CLAMP (2)
NUT (8 mm) (2)
24 N·m (2.4 kgf·m, 17 lbf·ft)