Verifying a project file
Verify the contents of a currently opened project and those of another project in a hard disk. Verification results are displayed
in a list and mismatches can be checked.
Verifying the hardware logic
The following describes how to verify the hardware logic.
1.
Select the following item.
[Project] [Project Verify]
2.
Select a project in a hard disk to be verified.
3.
Verification results are displayed.
In the verification result window, the match/mismatch status (the links to the input terminals of each block, setting values of the
block, and User Address) are displayed.
4.
Double-click a mismatch to jump to the corresponding section in the work window. When the links are mismatched, the
corresponding link in the work window is selected.
2 FUNCTIONS OF THE CONFIGURATION TOOL
68
2.5 Project Management