Verifying With The Module - Mitsubishi Electric MELSEC iQ-R User Manual

Verifying with the module

Verify the hardware logic in the project file being edited and the hardware logic saved in the flash ROM of the flexible high-
speed I/O control module. Verification results are displayed in a list and mismatches can be checked.
Verifying the hardware logic
The following describes how to verify the hardware logic.
1.
Select the following item.
[Online]  [Verify with Module (Flash ROM)]
2.
Verification results are displayed.
In the verification result window, the match/mismatch status (the links to the input terminals of each block, setting values of the
block, and User Address) are displayed.
3.
Double-click a mismatch to jump to the corresponding section in the Work window. When the links are mismatched, the
corresponding link in the Work window is selected.
2 FUNCTIONS OF THE CONFIGURATION TOOL
88
2.8 Online Functions