One-Shot Timer - Mitsubishi Electric MELSEC iQ-R User Manual

4.2

One-shot Timer

The output signal is turned on for the specified time period using an input signal as a trigger.
The following describes a link and parameter example of a one-shot timer. With the example setting, an output is turned on for
100ms using an external input signal as a trigger. Note that this link example is for when a 32-bit unsigned multi function
counter block is used.
ON
Input signal
OFF
ON
Output signal
OFF
Link and parameter
The following shows a link example of the hardware logic outline window and a link example and parameter setting example
of the multi function counter block detail window.
■Hardware logic outline window
Trigger signal
4 BLOCK LINK EXAMPLES
186
4.2 One-shot Timer
100ms
Output stop signal
External output
signal