Mitsubishi Electric MELSEC iQ-R User Manual page 261

Creating a hardware logic
Create a hardware logic with the configuration tool.
■Link and setting in the Hardware logic outline window
1.
Arrange a 32-bit unsigned multi function counter block in the hardware logic outline window, and link it with an external
input block.
• To output signals externally according to the counting result, link the multi function counter block with the external output
block.
2.
Set the external input blocks according to the external input signal specifications.
3.
When using the external output block, set it according to the external output signal specifications and output timing.
Appendix 5 Operation Examples of When the Remote Head Module Is Mounted
A
APPX
259