Setting In The Master Station - Mitsubishi Electric MELSEC iQ-R User Manual

Setting in the master station

Connect the engineering tool to the CPU module of the master station and set parameters.
1.
Create the project with the following settings.
[Project]  [New]
2.
Configure the setting to use the module labels and add the module labels of the CPU module.
3.
Add the master/local module with the following settings.
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]
APPX
254
Appendix 5 Operation Examples of When the Remote Head Module Is Mounted