Comtech EF Data CSAT-5060 Installation And Operation Manual page 95

CSAT-5060 50 Watt C-Band Transceiver
Redundant Systems
B.1.1.7 T IF I
X NTERFACES
The Tx IF input signal is fed from the customers equipment to the RSU-5060 at
connector J6. The RSU-5060 contains a power splitter which feeds the IF input
signal to both CSAT A and CSAT B via the J7 and J8 connectors. The IF power
at J7 and J8 will nominally be 3dBm less than the IF input power at J6.
B.1.1.8 R IF I
X NTERFACES
The Rx IF output signal is fed to the customers equipment from the RSU-5060 at
connector J9. The RSU-5060 contains a power combiner which takes the IF input
signals from both CSAT A and CSAT B via the J10 and J11 connectors and
provides a single output signal at J9. The IF output power at J9 will nominally be
3dBm less than the IF input power at either J10 or J11.
B.1.2 M
ECHANICAL
The RSU-5060 is housed in a weather resistant, sealed aluminum housing with
five external circular connectors and six Female N-Type connectors. The
mechanical dimensions and mounting interface are shown in Chapter 1
, J6, J7,
AND
, J9 – J11
I
NTERFACE
J8
B-5
Revision 0
MN/CSAT506050.IOM