Comtech EF Data CSAT-5060 Installation And Operation Manual page 7

Comtech EF Data Documentation Update
Subject:
Date:
Document:
Part Number:
Collating Instructions:
Comments:
Revised Important Note and step 7 to read:
IMPORTANT
7.
Filename: T_ERRATA
Errata C
Revised Assembly Procedures for TRF Filter
September 17, 2002
CSAT5060 50Watt, C-Band Transceiver, Installation and
Operation Manual, Rev. 0, dated April 23, 2002
MN/C506050.EC0
Attach this page to page 2-23
Ensure that the OUTPUT flange of the filter is against switch (5).
TRF Filter is Customer-Selectable at time of ordering.
Position TRF Filter (customer-selectable), gasket (Table 2-7, Item 11), and
Support Bracket (Table 2-8, Figure 2-12, AS/0502) on Port 4 of switch (Table 2-
7, Item 5) and secure with 8 bolts (Table 2-8, Item 3), lockwashers (Table 2-8,
Item 2), and flat washers (Table 2-8, Item 1) from AS/0502 kit, and use 2 bolts
(Table 2-7, Item 7, Figure 2-11), lockwashers (Table 2-7, Item 8), and flat
washers (Table 2-7, Item 12) from AS/438 kit.
1