Chapter 3. System Operation; Pin-Outs - Comtech EF Data CSAT-5060 Installation And Operation Manual

Chapter 3. SYSTEM OPERATION

This section contains instructions for operating the CSAT-5060, 50 Watt C-Band
Transceiver. The Primary customer interface to the CSAT is via the Remote
Communications port. Appendix A provides details regarding the protocol and
command/response structure used on this interface. This section will define in
detail the controllable parameters provided via the command/response structure.
3.1 P -
IN OUTS
3.1.1 C
ONNECTOR
VAC.
WARNING
J3: AC P , M
OWER
To avoid a serious shock hazard, correctly determine the mating connector type
in use and wire it according to the following table:
EARLY UNITS
Pin Mating Connector Type
KPT06J12-3S
MS3116J12-3S
A Line
B Ground
C Neutral

3.1 Pin-outs

3.2 Turning On the CSAT
3.3 Configuring the CSAT
, 100 125 VAC,
AINS TO
NEWER UNITS
Mating Connector Type
CA3106E18-22SB
Ground
Neutral
Line
3–1
3–1
3–3
3–3
205 240
OR TO