Lna Installation; Figure 2-8. Installation Of Lna - Comtech EF Data CSAT-5060 Installation And Operation Manual

CSAT-5060 50W C-Band Transceiver
Installation
2.4.3 LNA I
NSTALLATION
Refer to Figure 2-8.
The LNA is mounted to the
OMT using the Waveguide Kit,
CPR229, PN AS/0461.
To install a single LNA to an
antenna, follow these steps:
1. Remove the protective cover from the antenna OMT and LNA.
2. Install the appropriate gasket on the antenna end of the LNA.
3. Position the LNA (with gasket) in place on the antenna and fasten using
a. If only one of the mounting surfaces has a groove, use the half-thick
gasket.
b. If both mounting surfaces have grooves, use the full thick gasket.
the supplied hardware.

Figure 2-8. Installation of LNA

2–10
Revision 0
MN/CSAT506050.IOM