Equipment Return And Repair Procedure; Product Application, Upgrading Or Training Information - Comtech EF Data CSAT-5060 Installation And Operation Manual

CSAT-5060 50W C-Band Transceiver
Maintenance and Troubleshooting
Transceiver Over Temperature Fault:
A fault ("FT") indicates that the converter is over temperature. Turn the prime
power switch off and return the transceiver to Comtech EF Data for repair.
C.4 E
QUIPMENT
Refer to the Customer Support section in the Preface of this manual for additional
information on returning equipment for repair.
An item is considered "Out-of-Warranty" if the warranty period (as determined by the
original purchase) has expired; or the equipment has been damaged or otherwise
made unusable as a result of an accident or unreasonable use, neglect, improper or
IMPORTANT
unauthorized service, repairs or modifications, or other causes not arising out of
defects in design, material, or workmanship.
C.5 P A
RODUCT
I
NFORMATION
To obtain product application, upgrade or training information, contact Comtech
EF Data Customer Support at: service@comtechefdata.com
R R
ETURN AND
, U
PPLICATION PGRADING OR
P
EPAIR ROCEDURE
T
RAINING
C–4
Revision 0
MN/CSAT506050.IOM