Comtech EF Data CSAT-5060 Installation And Operation Manual page 55

CSAT-5060 50W C-Band Transceiver
Installation
4. Secure each LNA with 8 bolts (Table 2-7, Item 7), lock washers (Table 2-7,
Item 8) and flat washers (Table 2-7, Item 12). (See Figure 2-21.)
5. Position adapter (Table 2-7, Item 3) and gasket (Table 2-7, Item 11) on Port 3
and secure with 10 bolts (Table 2-7, Item 7), lock washers (Table 2-7, Item 8),
and flat washers (Table 2-7, Item 12).
6. Place termination (Table 2-7, Item 10) on threaded part of Adapter (Table 2-7,
Item 3)
Ensure that the OUTPUT flange of the filter is against switch (5).
IMPORTANT
7. Position filter (Table 2-7, Item 4), gasket (Table 2-7, Item 11), and Support
Bracket (Table 2-8, Figure 2-12, AS/0502) on Port 4 of switch (Table 2-7,
Item 5) and secure with 8 bolts (Table 2-8, Item 3), lockwashers (Table 2-8,
Item 2), and flat washers (Table 2-8, Item 1) from AS/0502 kit, and use 2
bolts (Table 2-7, Item 7, Figure 2-11), lockwashers (Table 2-7, Item 8), and
flat washers (Table 2-7, Item 12) from AS/438 kit.
8. Set assembly aside for later installation.
2–23
Revision 0
MN/CSAT506050.IOM