B.2 Rsu-5060 Operation - Comtech EF Data CSAT-5060 Installation And Operation Manual

Comtech EF Data Documentation Update
Subject:
Date:
Document:
Part Number:
Collating Instructions:
Comments:
The following changes provide updated information for Appendix B. This information will be
incorporated into the next revision.
Change Specifics:
Appendix B.REDUNDANT SYSTEMS
The CSAT-5060, 50 Watt C-Band Transceiver is capable of operating in both stand-alone
and redundant configurations. The CSAT fully redundant system provides automatic
detection, switching, and status for both its configuration and health. The system is
designed such that stand-alone operation is a functional sub-set of the fully redundant
CSAT system. This provides the user with transparent functionality regardless of the
mode or complexity the system has been setup to operate in.
Due to the parallel nature of the M&C interface, only EIA-485 and EIA-422
communications are supported through this device.
IMPORTANT
s:\tpubs\manuals\released_word\transceivers\csat5060 50w rev0\errata\mn-c506050.ee0.doc
Errata E
Changes to Appendix B (Supported Communications)
June 18, 2003
CSAT-5060 50 Watt C-Band Transceiver Installation and
Operation Manual, Rev. 0, dated April 23, 2002
MN/C506050.EE0
Attach this page to page B-1
B.1 Redundant System

B.2 RSU-5060 Operation

B.3 Configuring A Redundant System
B-1
B-6
B-9
1