Cleaning Air Filter; Removing The Carburetor Connection Boot; Installing The Carburetor Connection Boot - KTM 450 EXC-R EU Repair Manual

Hide thumbs Also See for 450 EXC-R EU:
Table of Contents

Advertisement

06/AIR FILTER

Cleaning air filter

Warning
Environmental hazard Problem materials cause environmental damage.
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
Info
Do not clean the air filter with fuel or petroleum since these substances attack the foam.
Remove the air filter. (
Wash the air filter thoroughly in special cleaning liquid and allow it to dry properly.
Cleaning substance for foam air filter (
Info
Only press the air filter to dry it, never wring it out.
Oil the dry air filter with a high/quality filter oil.
Oil for foam air filter (
Clean the air filter box.
Check carburetor connection boot for damage and tightness.
Install the air filter. (
P. 26)

Removing the carburetor connection boot

Installing the carburetor connection boot

P. 26)
P. 175)
P. 175)
Remove the air filter. (
Loosen the hose clip
wall and remove it.
500108-10
Check parts for damage and wear. Replace damaged or worn parts.
Position the carburetor connection boot
the hose clip
Install the air filter. (
500108-11
P. 26)
. Unhang the carburetor connection boot
and hang it into the filter wall. Position
and tighten it.
P. 26)
27
from the filter

Advertisement

Table of Contents
loading

Table of Contents