Siemens SINAMICS G110D Operating Instructions Manual page 65

Figure 5-19
Commissioning the application
To specifically parameterize the Inverter for an application, the "Expert list" should be used
to gain access to any of the required parameters. The values can be modified from within
STARTER.
Figure 5-20 Expert list
Saving parameter data
While the STARTER is online and connected to Inverter it is possible to save all the
parameter data and configuration data to the Inverter by uploading the data to the Inverter
memory.
To upload the data to the Inverter, simply press
SINAMICS G110D
Operating Instructions, 2009-05-15, A5E02385577A AB
STARTER control panel
5.6 Commissioning with STARTER
.
Commissioning
65