Commissioning With The Iop - Siemens SINAMICS G110D Operating Instructions Manual

Commissioning

5.7 Commissioning with the IOP

5.7 Commissioning with the IOP
Functions of the Intelligent Operator Panel (IOP)
The Intelligent Operator Panel (IOP) has been designed to enhance the interface and
communications capabilities of SINAMICS Inverters.
The IOP Hand-held Kit is required to connect the IOP to the Inverter. The IOP should
automatically recognise the devices from the SINAMICS range.
The IOP provides support, using the USB connection utilizing a PC, for the following
functions:
● Downloading of wizards
● Downloading additional languages
Note
IOP functional support
• Devices prior to version 3.0 firmware may not be fully supported by the IOP.
• The actual menu structure and functionality of the IOP will be influenced by the
66
following factors:
– The software version and type of Control Unit to which the IOP is fitted.
– The firmware and software version of the IOP.
– The selected functional group filtering of the parameters.
Operating Instructions, 2009-05-15, A5E02385577A AB
SINAMICS G110D