Siemens SINAMICS G110D Operating Instructions Manual page 144

Functions
6.11 Operation in fieldbus systems
Figure 6-29
Select the AS-i slave from the drop-down list. Three basic types of AS-i slave are available:
● AS-i slave universal - AS-i slave with extended addressing mode
● AS-i standard slave universal or AS-i analog slave - AS-i slave for the standard address
● Siemens slaves - with this option you can configure the AS-i slave by simply selecting the
Configuring the properties of an AS-i slave
Using the individual property dialogs an slave can be configured with the following
properties:
144
Properties dialog CP343-2 - slave configuration
area; if you use this slave type, you cannot place an AS-i A/B slave at the same address
in the B address area.
relevant order number from the drop-down list.
Figure 6-30 Configuring an individual slave
Operating Instructions, 2009-05-15, A5E02385577A AB
SINAMICS G110D